MATERIAL

STRUCTURE PRINCIPLE

The water level of the tank is controlled by the float device to prevent overflow.

When the water level is close to the set value, the valve automatically adjusts the flow of water.

APPLICATION EXAMPLE

ANNOUNCEMENT

• On the upstream side of the control valve, install a filter to ensure that the water flowing through the control valve is clean

• On the downstream side of the control valve, an exhaust valve should be installed to remove the mixed gas in the pipeline

• When the control valve is installed horizontally, the maximum tilt Angle of the control valve shall not exceed 45°

• When the control valve is installed vertically, the corresponding spring accessories must be purchased (optional)

DIMENSION