The BV76 (DN15-DN32) series dynamic balance electric control valve is used in conjunction with the BVACDV series actuator in air conditioning systems, such as pre cooled air conditioning units (PAUs), air conditioning units (AHUs), fresh air units (MAUs), or heating system panel exchanges. The controlled end flow rate is adjusted according to the temperature requirements of the air conditioning area and the control system signal, and the pressure difference in the pipeline network is maintained constant to ensure that the controlled end is not affected by the operation of other equipment in the pipeline system, Maintain efficient, energy-saving, and stable operation of the system.

• Size: DN15-DN32

• Medium temperature: -10 ℃ ~120 ℃

• Pressure rating: PN16

• Working medium: air conditioning hot and cold water, ethylene/propylene glycol solution

• Connection method: Threaded connection BSPP(customizable BSPT/NPT)

• Connection standard: EN10226

• Flow error: ≤ 5%

• Working voltage: 24VAC

• Control signal: 0-10VDC/4-20mA

• Working pressure difference range: 30-400KPa

• Protection level of actuator: IP43

• Control characteristic: Equal percentage characteristic

VALVE FEATURES

• Equal percentage control characteristics

• Maintain a constant pressure difference at both ends of the regulating valve

• Automatic travel detection function

• The regulating valve core of this valve adopts a straight stroke design, providing a regulating actuator

ACTUATOR FEATURES

• Low AC voltage bidirectional synchronous motor drive.

• Magnetic clutch.

• The action is transmitted using a plastic gear set, with low noise.

• Flame retardant ABS engineering plastic cover.

• It has timeout protection function and fault protection function without control signal.

• After the valve is installed, the driver can be installed and assembled on-site, with flexible and convenient wiring.

• The graphic design of the driver can be installed close to the wall, taking up less space